48V100Ah LiFePO4 Battery

Offers up to 10 times longer cycle life and 5 times longer float calendar life than lead acid battery.Helping to minimise replacement cost and reduce total cost of ownership.  About 40% of the weight of a comparable lead acid battery. A ”drop in” replacement for lead acid battery.  Delivers twice power of lead acid battery, even high discharge rate, while maintain high energy capacity. Lithium iron phosphate chemistry eliminates the risk of explosion or combustion due to high impact, over charging or short circuit situation. Support unstable partial-state of charge (UPSOC) (charge/discharge) utilisation.

SARBS Rectifier with special feature module

System is a compact and intelligent power system containing up to 6 rectifiers, controller, AC Input, DC output with including Built-In RMS solution. In addition easy to install and compact size.  Rectifier converts 85-300V to 54V.

•Universal Module    •Tenant Wise Current and Watt Information  • Different Information of Battery Display Facility. •Built-in RMS with Rectifier.

Solar Solution

Net energy metering (NEM) refers to a policy mechanism that allows prosumers to connect their renewable energy systems to the distribution grid. The mechanism allows for the export of energy (e.g. electricity) generated from distributed renewable energy sources in exchange of credits in the form of energy or money.  With the right size solar energy system, you can produce enough electricity to match your home’s electricity use for the entire year. However, the amount of electricity your solar panels produce will vary throughout the year. Net metering helps you account for these differences by crediting you for the excess electricity your panels produce so you can use it later.

Outdoor Cabinet for Telecom

Outdoor telecommunications cabinets (OTC) are designed to accommodate, ensure the autonomous operation and protect the telecommunications equipment installed inside the cabinet from the environmental exposure at any time of the year. OTC provide uninterrupted power supply to the following systems: wireless communication, digital cable lines and wireless networks. Cabinets are designed so that the equipment to be installed inside of them must comply with ETSI 19 standards. 

Surge Protection Device

Introducing LPI’s patented  surge protection range of products. A state-of-the-art circuit designed to meet the latest IEC requirements combined with  low-power communication for cost-effective remote monitoring. Key Benefits  App-based operation removes the need for switchboards to be opened manually when undertaking maintenance checks for surge protection purposes  The App-based operation allows for maintenance checks to be undertaken remotely by non-technical personnel   Plug and base assembly for easy installation and maintenance  Alarm Interface Modules (AIM) allow for standalone or integrated communication  High performance surge protector for Class II applications  Thermal and short-circuit disconnect  50 kA surge rating capacity

Lighting Protection System

Today, lightning protection systems are in use on thousands of buildings, homes, factories, towers, and even the Space Shuttle's launch pad. The purpose of lightning protection design is to safeguard valuable equipment and assets from the hazards arising from exposure to lightning. We recommend a systems approach in lightning safety. The expertise and a wealth of knowledge to integrate those into an effective system to protect your facilities from lightning related outages.

Main Distribution Board

An MDB is a panel or enclosure that houses the fuses, circuit breakers and ground leakage protection units where the electrical energy, which is used to distribute electrical power to numerous individual circuits or consumer points, is taken in from the transformer or an upstream panel. An MDB typically has a single or multiple incoming power sources and includes main circuit breakers and residual current or earth leakage protection devices. A MDB is comprised of a free standing enclosure, a bus bar system, MCCB's, metering and support equipments and required current transformers. Panels are assembled in a systematic manner such as incomer section and outgoing section.

Remote Monitoring System

Remote Monitoring Systems  for remote industrial sites vary widely depending on the industry and site specific requirements. Solutions can range from a simple alarm callout to large enterprise SCADA networks with 100,000’s of I/O points.  The following overview describes the range of Industrial Remote Monitoring Systems.

Wind Mill

The windmill powered by the solar energy panel, the wind mill sails will start rotating in sunlight environment. Solar windmill need take a lot sunlight in order to start spinning, and it spins fast in strong sunlight, please make sure safe use. The wind mill is made of premium ABS plastic, solar panel base, linking shaft and wind mill sails structured in one body for simple design.

MCCB

The MCCB system uses a temperature-sensitive device also known as the thermal element along with a current sensitive electromagnetic device which is also known as the magnetic element in order to provide the overall trip mechanism which is relied for protection and isolation purposes. The MCCB basically utilizes a temperature-sensitive device which is also known as the thermal element with a current sensitive device are the magnetic elements to provide the protection and isolation which enables the MCCB device to provide overload protection along with electrical fault protection from any type of short circuit situations and also electrical switch for immediate disconnection.

Genset

In terms of use, gensets can usually be used as the main source or as an auxiliary source to respond to energy needs, in a credible and efficient way, whatever their application. In relation to their operation, the gensets are composed of a generator, which comes into action through combustion in the engine with the help of the alternator.

Gel Battery

The products are manufactured with nano silica gel technology, one of the two valve-regulated battery production technologies used in the industry, and have porous PVC separators and colloidal electrolyte inside. This series can work under high and low temperature, supports cyclic deep discharge, and has a long service life.

• Ultra-long discharge cycle • Used for power backup and energy storage • Special polar plate design, which ensures a long cycle file and a service life of over 20 years Special lead calcium alloy composition, which improves corrosion resistance of grids and increases the battery service life • Manufactured with high-porosity • PVC-SiO separators and world-leading 2 SiO gel technology • High heat capacity, reducing risks of thermal runaway and dehydration, suitable for use in rigorous environment • High gas recombination efficiency • Good deep discharge performance

Anti Theft Battery Rack

SARBS anti-theft rack solution for Li-ion Battery has fantastic strength with higher quality and enhanced security. Battery Installation with hidden steel rod and three-way flat bar protection for preventing theft incidents.

• Three-layer anti-theft protection: Grill door, Horizontal and Vertical Safety Flat Bar. • Inside there are three hidden lock (key based) covered with metal bar & case which ensure premium safety • Concealed safety lock system with coil technology which will stick the bar inside if any unwanted attempt to open the lock. • Full protection from side areas by using heavy angle bar. • Back portion is covered with heavy angle bar. • Inside there is a metal rod which protect the main door exclusively.